Towards light switchable surfaces

Simple item page
dc.contributor.advisorKlumperman, Berten_ZA
dc.contributor.advisorArnott, Gareth E.en_ZA
dc.contributor.authorReader, Paulen_ZA
dc.contributor.otherStellenbosch University. Faculty of Science. Dept. of Chemistry and Polymer Science.en_ZA
dc.date.accessioned2011-11-10T06:28:02Zen_ZA
dc.date.accessioned2011-12-05T13:15:07Z
dc.date.available2011-11-10T06:28:02Zen_ZA
dc.date.available2011-12-05T13:15:07Z
dc.date.available2011-11-10T06:28:02Z
dc.date.issued2011-12en_ZA
dc.descriptionThesis (MSc)--Stellenbosch University, 2011.en_ZA
dc.description.abstractENGLISH ABSTRACT: Polymeric nanofibrous membranes that act as surfaces offer two compelling properties; they have extremely large surface areas that can be modified and they can offer multiple reactive sites depending on which polymer they were electrospun from. Combining nanofibrous surfaces such as these with photochromic dyes can give remarkable, light responsive materials. In this study, a terpolymer was electrospun and crosslinked (to impart insolubility to the material) to produce a nanofibrous mat that contained surface secondary-hydroxyl units and benzyl chloride units, from which monomers could grow using surface-initiated atom transfer polymerization (SI-ATRP). The surface was further fluorinated though the secondary-hydroxyl moieties to produce a hydrophobic crosslinked nanofibrous surface. n-Butyl acrylate and a photochromic spiropyran dye were copolymerized from the surface using SIATRP, in order to produce a surface that exhibited reversible adhesion towards a water droplet using ultraviolet and visible light as a stimulus to change between the two states. This in principle would allow the droplet to roll off and stick to the surface respectively. Although the surface displayed a colour change when switched, proving that the SI-ATRP had taken place, the droplet of water remained attached to the surface in both states.en_ZA
dc.description.abstractAFRIKAANSE OPSOMMING: Polimeriese nanovesel membrane wat dien as oppervlaktes bied twee aantreklike eienskappe; hulle het baie groot oppervlakareas wat gemodifiseer kan word en hulle bied veelvuldige reaktiewe punte, afhangende van die polimeer waarvan hulle ge-elektrospin is. Deur sulke nanovesel oppervlaktes met fotochromiese kleurstowwe te kombineer, kan uitstekende lig reagerende materiale verkry word. In hierdie studie is ‘n terpolimeer ge-elektrospin en daarna gekruisbind (om die materiaal onoplosbaar te maak) om ‘n nanovesel web te kry wat oppervlak sekondêre-hidroksiel en benzielchloried eenhede bevat. Monomere kan dan vanaf hierdie eenhede groei deur middel van oppervlak-geïnisieerde atoomoordrag polimerisasie (OI-AOPR). Die oppervlak was verder gefluorineer via die sekondêre-hidroksiel eenhede om ‘n hidrofobiese, gekruisbinde nanovesel oppervlak te vorm. n-Butielakrilaat en ‘n fotochromiese spiropiraan kleurstof is gekopolimeriseer vanaf die oppervlak deur middel van OI-AORP om sodoende ‘n oppervlak te skep wat omkeerbare adhesie van ‘n water druppel gee as ultraviolet en sigbare lig as stimulus gebruik word om tussen die twee toestande te wissel. In beginsel sal die water druppel vanaf die oppervlak kan afrol én daaraan vassit, afhangende van die toestand van die oppervlak. Alhoewel die oppervlak van kleur verander het met die wisseling tussen die twee toestande, wat as bewys dien dat OI-AORP wel plaasgevind het, het die druppel water bly vassit aan die oppervlak in beide toestande.af_ZA
dc.identifier.urihttp://hdl.handle.net/10019.1/17959en_ZA
dc.language.isoen_ZAen_ZA
dc.publisherStellenbosch : Stellenbosch Universityen_ZA
dc.rights.holderStellenbosch University
dc.subjectNanofibrous matsen_ZA
dc.subjectPhotochromic dyesen_ZA
dc.subjectElectrospinningen_ZA
dc.subjectSurface chemistryen_ZA
dc.subjectDissertations -- Polymer scienceen_ZA
dc.subjectTheses -- Polymer scienceen_ZA
dc.subject.otherChemistry and Polymer Scienceen_ZA
dc.titleTowards light switchable surfacesen_ZA
dc.typeThesisen_za
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
reader_towards_2011.pdf
Size:
4.69 MB
Format:
Adobe Portable Document Format
Description:
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.98 KB
Format:
Plain Text
Description:
Download
Collections
Masters Degrees (Chemistry and Polymer Science)