Browsing by Author "Volschenk, Mercia"

Now showing 1 - 1 of 1
  • Thumbnail Image
    Item
    Characterisation and development of antifouling coatings for metal surfaces in aquatic environments
    (Stellenbosch : Stellenbosch University, 2015-04) Volschenk, Mercia; Cloete, T. E.; Botes, Marelize; Gule, N.; Stellenbosch University. Faculty of Science. Dept. of Chemistry and Polymer Science.
    ENGLISH ABSTRACT: Biofouling in cooling water systems lead to several problems resulting in reduced efficiency and financial losses. Antifouling coatings present an environmental friendly solution to prevent biofouling alternatively to the current use of toxic chemicals in cooling water systems. In this study biofilm growth in a cooling water system was simulated in a modified flow cell system to evaluate industrial antifouling coatings and biocide-enriched coatings as potential antifouling coatings for metal surfaces. The design of a novel antifouling coating was also attempted. Firstly, analytical methods for biofilm monitoring to evaluate selected antifouling coatings and biocides were optimised. Pseudomonas sp. strain CT07 was selected to grow biofilms in the biofilm studies. A metal alloy of stainless steel and mild steel (3CR12) showed no corrosion after a 24 h biofilm growth and was selected as metal surface for the biofilm growth discs. Sonification for 5 min was determined as the optimum biofilm removal method from the growth discs. After biofilm removal the metal growth discs were stained with the LIVE/DEAD® BaclightTM Bacterial Viability kit. Visualisation by confocal laser scanning microscopy and flow cytometry revealed auto fluorescence signals from metal discs that hindered quantitative and qualitative analysis of the metal substrate. The use of Pseudomonas sp. strain CT07::gfp to grow biofilms on the metal growth discs and the exclusion of the stain SYTO9 from the LIVE/DEAD® BaclightTM Bacterial Viability kit reduced auto fluorescence signals from the metal discs. The industrial coatings containing quaternary ammonium salt (QAC), triclosan (TC) and copper oxide (CUO) respectively, showed the highest antimicrobial activity in the disc diffusion test. The minimum inhibition concentrations for silver nitrate (SN) and copper sulphate (CS) were 432 ppm and 160 ppm respectively. A minimum of 6.25 % of furanone solution (FR) was biocidal in the dilution susceptibility test. Secondly, the metal growth discs were coated respectively with the three selected industrial coatings QAC, TC and CUO and the epoxy biocide-enriched coatings SN, CS and FR and chemically characterised before and after exposure to biofilm formation. The antifouling activity of these coatings was also characterized. Growth media inoculated with Pseudomonas sp strain CT07::gfp was circulated through the modified flow cell system via a multichannel peristaltic pump for 48 h before the coated metal discs were removed and washed to perform chemical or antifouling analysis. All the industrial coatings and biocide enriched epoxy coatings complied with the thermal stability requirements of a cooling water system. Scanning electron microscopy (SEM) imaging and Energy dispersive X-ray spectroscopy (EDX) analysis confirmed that the adhesion properties of industrial coatings TC and QAC in aqueous environments were insufficient and that the copper and silver ions leached out of the biocide-enriched epoxy coatings. The qualitative analyses of the attachment of bacteria on the surfaces of both the industrial and biocide enriched epoxy coatings was confirmed by SEM, CLSM. The attached bacteria were removed and analysed quantitatively through plate counts and flow cytometry. None of the industrial coatings or the biocide incorporated epoxy coatings that were used in this study would therefore be efficient for the use on metal surfaces in cooling water systems. Thirdly, several approaches were followed to synthesise a poly(styrene-alt-maleic anhydride) (SMA) coating, chemically bind a furanone derivative, 2,5-dimethyl-4-hydroxy-3-(2H)-furanone, to the polymer back bone of the SMA coating for the application as an antifouling coating for cooling water systems. The synthesis of SMA was confirmed through 1H NMR and SEC and the synthesis of tert-butyl 2-(2-hydroxyethoxy) ethylcarbamate and 4-(2-(2-(tert-butoxycarbonyl)ethoxy)ethoxy)-4- oxobutanoic acid was confirmed through 1H NMR and ES-MS+. The synthesis of the end furanone derivative product could however not be achieved.